Related Manuals for Stahl EC-940-AFZ Series
Summary of Contents for Stahl EC-940-AFZ Series
- Page 1 Manual / Operating Instructions Camera EC-940-AFZ R. STAHL Camera Systems GmbH Adolf-Grimme-Allee 8 D 50829 Cologne Version 01.00.04 Issue date: 23.07.2018...
-
Page 2: Disclaimer
Trademark The terms and names used in this document are registered trademarks and / or products of the companies in question. Copyright © 2018 by R. STAHL Camera Systems GmbH. Subject to alterations. Page 2 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 3: Formatting Conventions
Information highlighted by this symbol indicates the presence of "dangerous voltage" within the product's enclosure, which may constitute a risk of an electric shock to persons. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 3 of 40... -
Page 4: Warning
The ITE is to be connected only to PoE networks without routing to the outside plant. Caution ! The surface of the camera can heat up at ambient temperatures higher than 45 °C ! Caution at contact ! Page 4 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 5: Table Of Contents
Main mounting plate EC-940-AFZ 12.2.2.1 View 12.2.2.2 Dimensions 12.2.3 Mounting joint EC-940-AFZ 12.2.3.1 View 12.2.3.2 Dimensions 12.2.4 EC-940-AFZ camera with optional wall bracket and sun protection (SR) R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 5 of 40... - Page 6 Connection overview 13.2.3 Connection overview PoE++ variant Maintenance, overhaul and repair 14.1 Overhaul Troubleshooting Disposal 16.1 RoHS directive 2011/65/EU Terminals Declaration of EC conformity Release notes Page 6 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018...
-
Page 7: Preface
CE_EC-940-AFZ, which is not part of the delivery of the cameras. DOCUMENTATION You can find this document online at www.stahl-camera.de or request a copy from R. STAHL Camera Systems GmbH. Scope of delivery Camera EC-940-AFZ Main mounting plate EC-940-AFZ (mounted to camera EC-940-AFZ) ... -
Page 8: Recommended Specifications
• It is recommended to connect to IPv6 in Windows 7. • The camera does not support Internet Explorer Compatibility View settings. • For Mac OS X only the Safari browser is supported. Page 8 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 9: Nas Specification
When you use netgear's NAS equipment, do not allocate the capacity for use. NOTICE If you use NAS equipment for purposes other than video saving, the number of accessible cameras may be reduced. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 9 of 40... -
Page 10: Technical Data
SSDR (Samsung Super Dynamic Range) (off / on) Digital noise reduction SSNRIII (2D + 3D noise filter) (off / on) Digital image stabilization Off / On Defog Off / Auto / Manual Page 10 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... - Page 11 ~ 19), Google Chrome (Ver. 15 ~ 32) Apple Safari (Ver. 6.0.2 (Mac OS X 10.8, 10.7 only), 5.1.7) * Mac OS X only Central management software SmartViewer, SSM, mobile viewer R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 11 of 40...
-
Page 12: Poe++ Extender
A1 : 2010 + A12 : 2011 + A13 : 2013 RoHS directive 2011/65/EU Technical documentation for the assessment of electrical and electronic products with EN 50581 : 2012 respect to the restriction of hazardous substances Page 12 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 13: Certificates
@ Ta = -55 °C … +80 °C Ex db eb IIC T4 Gb @ Ta = -55 °C … +80 °C Ex tb IIIC T135 °C Db R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 13 of 40... -
Page 14: Type Code
EC-940-AFZ-HDF-O5I requires an FO switch at the receiving end with explosion protection "op is" ! NOTICE The operation of the camera type EC-940-AFZ-HDF-O6H (PoE++ version) requires the R. STAHL PoE++ Extender at the receiving end ! Page 14 of 40... -
Page 15: Safety Advice
No changes may be made to the EC-940-AFZ camera or one of its components that compromise explosion protection ! The camera may only be installed and operated in an undamaged, dry and clean condition ! R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 15 of 40... -
Page 16: Connecting Conditions
- where there may be dust agitation caused by pneumatics or gravity (camera installed on the floor of a dust silo) - closer than 1 m to a source of high voltage Page 16 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 17: Installation
This associated equipment must meet the related IEC requirements: for Ex e connection boxes this is IEC 60079-7 for Ex t connection boxes this is IEC 60079-31 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 17 of 40... -
Page 18: Cable Glands
* It is allowed to use any other Ex certified cable gland, which fulfill the technical requirements. NOTICE The cable glands are inclosed in the delivery, the stopping plugs are mounted at the camera tube. Page 18 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 19: Earthing
. Screw-in thread for equipotential bonding / earth connection M5x5 mm Bolt for equipotential bonding / earth connection at optional wall bracket M5x5 mm R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 19 of 40... -
Page 20: Mounting And Dismounting
Camera EC-940-AFZ 12.2.1.1 View "tube" without mounting plate front back NOTICE Cable glands are included in delivery. 12.2.1.2 Dimensions A x B: 484 mm x 137 mm Page 20 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 21: Main Mounting Plate Ec-940-Afz
Ø 8 mm for fall protection cable 4x M8 nut 6x M4 thread 12.2.3 Mounting joint EC-940-AFZ 12.2.3.1 View 12.2.3.2 Dimensions 80 mm 75 mm 70 mm R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 21 of 40... -
Page 22: Ec-940-Afz Camera With Optional Wall Bracket And Sun Protection (Sr)
551 mm 547 mm 621 mm 355 mm 5 mm = M5x10 mm bolt 177 mm 200 mm 135 mm 135 mm 80 mm Ø 11 mm Page 22 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... - Page 23 Manual / Operating Instructions EC-940 Mounting and dismounting Tilting angle M = max.: 90° adjustable Panning angle N = max.: 100° adjustable R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 23 of 40...
- Page 24 Manual / Operating Instructions EC-940 Mounting and dismounting Panning angle 0 = fixed to 90°, right or left: can be fixed to 90° Page 24 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018...
-
Page 25: Sun Protection (Sr)
330 mm 135 mm Ø 60.3 mm 5 mm M5x10 mm bolt 3x M8x21 mm bolt 200 mm 135 mm 135 mm 80 mm Ø 11 mm R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 25 of 40... -
Page 26: Ceiling Bracket Ec-94X-Afz
360.3 mm 480.65 mm 5 mm 3x M8x21 mm bolt M5x10 mm bolt 397.65 mm 135 mm 80 mm 200 mm 135 mm Ø 11 mm Page 26 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 27: Corner Bracket Adaptor Ec-94X-Afz
Ø 11 mm 4x M8 nut 12.2.6.4 Pole mounting adaptor EC-94x-AFZ - requires wall bracket - for pole diameter 88 – 150 mm 12.2.6.4.1 View front side R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 27 of 40... -
Page 28: Poe++ Extender
214 mm 194 mm 56 mm M8 thread 12.2.7 PoE++ Extender 12.2.7.1 View 12.2.7.1.1 Dimensions 133 mm 106 mm = 124.5 mm 40 mm 29 mm Page 28 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 29: Commissioning
When operating the EC-940-AFZ camera, particular care shall be taken that: the EC-940-AFZ camera has been properly installed according NOTICE to instructions, the camera is undamaged, all screws are tightened fast. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 29 of 40... -
Page 30: Ec-940-Afz Camera Connections
Green / white (Class 3, Green without heater) Blue / white (at PoE version Blue usage of all 8 wires Brown / white is necessary) Brown Page 30 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 31: Ec-940-Afz With Fo Interface
Black Power supply neutral Blue FO connection SC Duplex FO interface connector For the fiber optic connection use a bend improved fiber optical NOTICE cable. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 31 of 40... -
Page 32: Connection Overview Poe++ Variant
Overhauling may only be carried out by specially trained staff who are familiar with all basic conditions of the applicable user regulations and – if requested – have been authorized by the manufacturer. Page 32 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 33: Disposal
The revision of RoHS directive 2001/95/EC and the resulting revised version 2011/65/EU extends its scope to all electric and electronic products. The cameras are conform with the requirements from RoHS directive 2011/65/EC, dated 03.01.2013. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 33 of 40... -
Page 34: Terminals
Manual / Operating Instructions EC-940 Terminals 17 Terminals Type UT terminals by Phoenix Contact are installed inside the NOTICE camera's connection box. Please note the following ! Page 34 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... - Page 35 Manual / Operating Instructions EC-940 Terminals R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 35 of 40...
- Page 36 Manual / Operating Instructions EC-940 Terminals Page 36 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018...
- Page 37 Manual / Operating Instructions EC-940 Terminals R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 37 of 40...
-
Page 38: Declaration Of Ec Conformity
Manual / Operating Instructions EC-940 Declaration of EC conformity 18 Declaration of EC conformity Page 38 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018... -
Page 39: Release Notes
Addition of warning lable "hot surface" in section "Warnings" Version 01.00.04 Correction typicall coloure at terminal labelling Adaption of section "Disposal" according to the current WEEE directive Formal changes R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018 Page 39 of 40... - Page 40 R. STAHL Camera Systems GmbH Adolf-Grimme-Allee 8 D 50829 Cologne Phone: (switchboard) +49 (0) 221 76 806 - 1200 Fax: - 4200 E-mail: (switchboard) office@stahl-hmi.de (hotline) support@stahl-hmi.de www.r-stahl.com www.stahl-camera.de...
Need help?
Do you have a question about the EC-940-AFZ Series and is the answer not in the manual?
Questions and answers