Table of Contents
Advertisement
Head Cleaning
Cleaning
20
Chapter 4 Care and Maintenance
To keep the AIT drive in top condition, clean the head as needed using the
proper head cleaning cartridge. When the head needs cleaning, the STATUS
indicator blinks (see page 9).
1
Insert the head cleaning cartridge into the AIT drive. Cleaning starts
automatically.
2
About 15 seconds later, cleaning stops and the cartridge is ejected
automatically.
One head cleaning cartridge can be used about 50 times.
Note
Do not rewind the cleaning cartridge and reuse it. When you reach the
end of the cartridge, dispose of it and buy a new one.
Advertisement
Table of Contents
