The Singing Machine ISM398BT Instruction Manual page 5

Connection
Connecting the Microphone(s)
u
Connecting to AC Power
Insert the small end of the AC adapter
into the DC IN jack on the rear of the
unit. Insert the other end (with the
2 blades) into a conveniently located
AC outlet having 120V AC, 60Hz.
Notes:
• Only use the supplied AC adapter.
Failure to do so may cause a fire
or damage the unit.
• The AC adapter included with this unit is for its use only. Do not use it with other
equipment.
• Turn off the unit before unplugging the AC adapter from the unit to avoid damaging the
unit.
• When the unit is not going to be used for a long time, disconnect the AC adapter from
the AC outlet.
• If the unit acts erratically or malfunctions, unplug the unit, wait 20 seconds and plug it
back in.
• Never use an AC adapter that is damaged. Route power lead in a safe manner and make
sure it is not subjected to trapping or pinching. If the power lead is damaged, refer to a
qualified service agent.
Insert a microphone's plug into the Mic 1
jack u. Insert the other microphone's plug
into the Mic 2 jack v (if desired).
v
Note: Do not drop or tap the mic, as
damage to the mic or speakers may occur.
Do not spin the microphone around for the
same reason.
— E4 —