Table of Contents
Advertisement
Connectivity
I am not able to
Issues
access my device.
Functions
The unit will not
operate.
Functions
The airflow that
comes out of the air
outlet is significantly
weaker than before.
Functions
Why I hear
excessive noise
during device
operation?
Troubleshooting
Please check if the Device is
within Wi-Fi range. If the LED on
your Device is flashing slowly,
please try to move the Device
closer to the router for better
Wi-Fi connectivity and try again.
1.
Please check and make sure
that the unit is properly
plugged in and the power
outlet is energized.
2.
Please make sure that the
unit has been turned ON.
3.
Please check and make sure
that the filter is properly
installed and the rear grill is
seated correctly.
1.
Please make sure that
nothing is blocking the air
inlet and filtered air outlets.
2.
Please check the filter
condition and replace it if
necessary.
3. Please check if you have
removed all packaging
material.
4. The air quality sensor is wet.
The humidity level in your
room is high and causes
condensation. Make sure
that the air quality sensor is
clean and dry (see 7.4 Clean
the Air Quality Dust Sensor)
1.
Please check and make sure
that the parts are firmly
positioned in place.
2.
Please check if you have
removed all the packaging
material from the HEPA
filter.
29
Advertisement
Table of Contents
