Controls - Igo eXtreme User Manual

DISPLAY & FUNCTIONS

CONTROLS

Turning the ebike ON/OFF
Press and hold the 'MODE' Button for 2 seconds to turn the electric system
on or off. The control panel can only be used when the battery is connected
to the ebike and key switched to the 'on' position. If the system is not used
for a duration of 10 minutes, it will shut itself off to conserve battery.
Selecting the display mode
Press the 'MODE' button to cycle through the different modes of the display.
Speed/Trip Distance/Trip Time/Max. Speed/Average Speed/Motor Power
Adjusting the pedal assistance levels
Use the 'PLUS' and 'MINUS' buttons to select the different levels
of pedal assistance. (0 - 5)
Power level 5 gives the strongest assistance from the motor.
In power level 0 the motor does not provide any pedal assistance or throttle
but you will still be able to use thelights and functions of the display.
NOTE: The battery will run out of power quicker when
using a higher level of pedal assistance.
Throttle
Your bike is equipped with an on demand throttle on the left grip.
The throttle can only be used within pedal assist levels 1 though 5.
Level 0 is for conventional non electric riding.
Regardless of the power assist level you select the throttle
is capable of taking you to top speed.
You can use the throttle along with the pedal assist or on its own.
YOU MUST ALWAYS WEAR AN APPROVED BICYCLE HELMET
8
WHEN RIDING AN ELECTRIC BIKE.
w w w . i G O e l e c t r i c . c o m