Adjusting The Tape-In Module - Siemens ProLINE-RoadRunner ProLINE-RoadRunner Operator's Manual

Non-Adjustable
30

Adjusting the Tape-In Module

Adjustable
2
ProLINE-RoadRunner Operator's Guide
If you have an Adjustable Tape-In
Module, you may need to adjust the
tape width.
Adjustable Tape-In Module only—
If the etched number on the
3-Position Spacer does not match
your tape width dimension (mm):
1. With the power off (0), move the
Current
Setting
2. Loosen the Position Locking
PNP Head out of the way.
Screw using a 4 mm Allen
wrench.