Connecting Power And Air - Siemens ProLINE-RoadRunner ProLINE-RoadRunner Operator's Manual

1
16

Connecting Power and Air

2
ProLINE-RoadRunner Operator's Guide
To connect the power and the air:
1. Turn the RoadRunner power
switch to the Off (0) position.
2. Grasp the air hose behind the
"quick connect" collar and push
it firmly onto the male fitting.
The collar must be allowed to
move back as it goes onto the
fitting.
NOTE: Compressed air must be
clean and dry at approximately
2
5.25 kgf/cm (75 psi).
Warning:
Point Air Hoses Away From Body.
Wear Approved Eye Protection.
A