Connecting The Operator Panels; Switch Settings; Module Configuration - Siemens WS 400-30 Description

4

Connecting the Operator Panels

4.1.

Switch Settings

4.1.1

Module Configuration

The WS 400-30 and WS 400-50 operator panels can be connected to different graphics and/or
control systems. Adjustment of the operator panel setting to the connected graphics and/or
control system is by means of DIL switch S1 that is built in to the keyboard encoder. Viewed
from the back, the encoder is to the left of the monitor behind a cover plate.
Switches on the keyboard encoder board for setting the module configuration and the keypad
identification:
X16
X17
X4
©
Siemens AG 1992 All Rights Reserved
WS 400-30/WS 400-50 (Description)
X14
X15
S8 S7
S10 S9
System-dependent jumpers
see 4.2
X33
X1 X2
6ZB5 440-0KP02
S1
Programmer
X18
4 - 1