Page 1
USER MANUAL Share your vision Thank you for choosing a PNJ product. This manual describes how to prepare and use your product. It’s also providing information about the utilization and safety precautions, the regulations, compliance and technical specifications of the device. Please read completely, carefully and regularly before use, become familiar with all the feature of the device and ensure safety use of your drone to enjoy fully with it.
Table of Contents Table of Contents ............................1 Li-po battery ..............................1 ATTENTION / WARNING / WAARCHUWING .....................2 Precautions for use .............................2 Warning ..............................3 Flight environment ............................3 Download the App ............................3 Included in the pack ............................3 Drone parts..............................4 Radiocontroller 2.4 Ghz ..........................4 How to install and charge the battery ......................5 Warning ..............................6 How to install the camera ..........................6...
ATTENTION / WARNING / WAARCHUWING Veuillez lire le “Mode d’Emploi” entièrement et attentivement avant toute utilisation. Le manuel mis à jour est disponible sur notre site: www.pnj.fr/modes-demploi/ ATTENTION: Toutes les précautions d’utilisation concernant les batteries Li-Po doivent être suivies rigoureuse- ment.
PNJ assumes no liability for damage resulting directly or indirectly from the use of the product, any part of this product or this manual. PNJ cannot be held responsible for any accident, injury, death, loss or other claim of any nature whatsoever related to or resulting from the use of this product.
Drone parts Avant Propeller protections Propellers front LED Battery Camera support Micro SD port Camera Battery Landing gear indicator On/Off button 1x CVR360 1x Smartphone holder 1x Battery Li-Po 3.7V 1500mah 1x USB charger 4x Battery 1.5V AA 1x Screwdriver 4x Replacement propellers 4x Propeller protections Radiocontroller 2.4 Ghz...
How to install / remove smartphone support: The expandable radio remote control bracket adjusts to different smartphone sizes (Figure 2). To safely install or remove the radio control holder, please refer to the diagrams below. 1. Install the bracket: Insert the bracket vertically into the rail on the back of the RC and screw in the safety screw. 2.
Warning 1. Make sure that the voltage required for USB charging matches the power source used: 5V / 1A max 2. If the charging plug or the battery overheats during charging, immediately stop charging. 3. Never leave the battery charged unattended. 4.
How to install propellers Front Figure 1: Extraction of propellers Figure 2: Propeller Installation Back The propellers of the drone are provided with marks A and B and are diagonally opposite. Each propeller is blocked by a screw and fits on the rotor in one direction. 1.
To learn how to fly we recommend to control your drone only with the radio remote control. The GPS functions of the DR-POWER HD can be used only when the drone is connected to the mobile application. Follow the instructions below to start controlling the DR-POWER HD only with the remote control: 1.
WIFI, you can still use mobile data to access the internet. Tip: The instructions for using the "PNJ POSITION" application are also available in the help menu of the application. To access the help menu, go to the main menu and then touch the "HELP" button.
Automatic take off and landing (with the app) Takeoff Landing The drone rises 2m regardless of its starting altitude. 1. Take-off: After the automatic take-off / landing button has been pressed for a long time, the drone rises and stabilizes at an altitude of 2m above its starting position. 2.
Headless mode CF mode disabled CF mode activation CF mode enabled (long pressure) Avant indicator CF mode (joystick press) Activation: At the time of the command the drone saves its orientation and memorizes it (Figure 2: North). Long press the "CF Mode" button (Figure 2) to activate the direction / orientation lock (Figure 2: North). The radio control will beep (beep), the top LED indicator will illuminate, and the front right and left rear LEDs of the drone will blink simultaneously when you activate the CF Mode function.
How to use joysticks ELEVATION Elevation • LEFT JOYSTICK - Tilt up to ride up - Tilt down to go down Note: Always handle the elevation Descent joystick with caution. Rotate to Rotate to the left the right ROTATION • LEFT JOYSTICK - Tilt left to turn left - Tilt right to turn right LONGITUDINAL MOVEMENTS...
To take a photo / video, please first insert a Micro SD card into the camera holder and then: 1. Radio control: Press the photos / videos button on the radio remote control. 2. Mobile App (PNJ POSITION): Touch the icons at the bottom right of your screen (circled in red). Photo: Short press...
7. Map: Tap to view the map and track your position (blue dot) and the position of the drone (red dot) in real time. 8. VR Mode - Immersion Control: Touch this button to divide the screen in half to use the CVR360 PNJ headset. Touch the icon again to exit.
Orbital flight Activated orbital flight Activation of Orbital Flight Starting position Orbital flight Place the drone above the target of Press the Vol Orbital button, the The drone rotates above the locked the orbital flight. drone rotates (radius: 5m). position (radius: 5m) Operation of Orbital Flight (GPS): Pressing the orbital flight button tells the drone to lock the position over which it is located and automatically rotate within a 5m radius.
It is not recommended to change the engine or the motherboard on your own. - Use only accessories specified by the manufacturer. - Find all our products and accessories on our website www.pnj.fr -16-...
of spare parts provided by PNJ. - Defects caused by parts not supplied by PNJ, including a battery not approved by PNJ. All products found to be defec tive after analysis will be returned to the shipper at their expense.
Consult local authorities or your dealer for recycling advice. Declaration of conformity SAS PNJ, 110, Esplanade du Général de Gaulle 92400 Courbevoie, France, declares under its sole responsi- bility that the product described in this manual complies with the requirements of the RED 2014/53/EU et RoHS 2011/65/EU.
SAS PNJ can not be held responsible directly or indirectly for any prejudice or loss of data resulting from an error or omission in this document. SAS PNJ reserves the right to modify the product and its operating instructions without any restriction or obligation to inform the user.
Need help?
Do you have a question about the DR-POWER HD and is the answer not in the manual?
Questions and answers