Page 1
User Manual Share your vision Thank you for choosing a PNJ product. This manual describes how to prepare and use your drone. It also pro- vides information on the use and safety precautions, regulations, compliance and technical specifications of the drone. Please read it carefully and thoroughly before use, to familiarize yourself with all the features of the unit, to ensure the safe use of your drone and to take full advantage of it.
WARNING / ATTENTION / WAARCHUWING Please read the operation manual carefully before using the product The english User Manual can be downloaded on our website: www.pnj.fr/en/user-manuals/ WARNING : LiPo batteies are dangerous, please follow the instructions to avoid injuries or damages.
PNJ assumes no liability for damage resulting directly or indirectly from the use of the product, any part of this product or this manual. PNJ cannot be held responsible for any accident, injury, death, loss or other claim of any nature whatsoever related to or resulting from the use of this product.
7. Do not short-circuit the battery. 8. Keep the battery away from metal parts or magnets. Gyroscopic calibration The R-Nano HD is equipped with an auto-trim system whereby its initial settings can be restored. To recalibrate the drone gyroscope please follow the following steps: 1.
Install the propellers Please make sure to install the propeller correctly, the propellers are marked “A” and “B”refer to the picture below to learn the proper location of each propeller.Gently ease the propeller off of the metal shaft. Carefully push the replacement propeller onto the steel shaft and ensure that it is installed firmly.
Start to fly 1. Place the drone on a flat surface and connect the battery, the LED light on the drone should start flashing. 2. Turn on the remote control. 3. Press the left joystick all the way to the front, then all the way to the back. The remote will beep and the drone lights will stop flashing.
Flight Adjustments If the drone spins on itself to the left : Push the trim A to the right. If the drone spins on itself to the right : Push the trim A to the left. If the drone moves sidewards to the left.
It is not recommended to change the engine or the motherboard on your own. - Use only accessories specified by the manufacturer. - Find all our products and accessories on our website www.pnj.fr...
of spare parts provided by PNJ. - Defects caused by parts not supplied by PNJ, including a battery not approved by PNJ. All products found to be defec tive after analysis will be returned to the shipper at their expense.
Consult local authorities or your dealer for recycling advice. Déclaration of Conformity SAS PNJ, 110, Esplanade du Général de Gaulle 92400 Courbevoie, France, declares under its sole respon- sibility that the product described in this manual complies with the requirements of the R & TTE Directive 1999/5 / EC / RED 2014/53 / EU / RoHS 2011/65 / EU and Toy Safety Directive 2009/48 / EC.
SAS PNJ can not be held responsible directly or indirectly for any prejudice or loss of data resulting from an error or omission in this document. SAS PNJ reserves the right to modify the product and its operating instructions without any restriction or obligation to inform the user.
Need help?
Do you have a question about the R-Nano HD and is the answer not in the manual?
Questions and answers