Safety Precautions - TECshow NAVIGATOR 3 User Manual

2. SAFETY PRECAUTIONS

• The reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
• Do not spill water or other liquids into or on to
your unit.
• Do not attempt to operate this unit if the power
supply has been frayed or broken.
• Never operate this unit when it's cover is re-
moved.
• Never plug this unit in to a dimmer pack.
• Always be sure to mount this unit in an area
that will allow proper ventilation. Allow about
6" (15cm) between this device and a wall.
• Do not attempt to operate this controller, if it
becomes damaged.
• This unit is intended for indoor use only, use of
this product outdoors voids all warranties.
• During long periods of non-use, disconnect the
unit's main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to the point they exit from
the unit.
• Heat -The controller should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The controller should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug has been
damaged.
B. Objects have fallen, or liquid has been
spilled into the controller.
C. The controller has been exposed to rain or
water.
D. The controller does not appear to operate
normally or exhibits a marked change in
performance.
E. The controller has fallen and/or subjected
to extreme handling.
P. 3
| Tecshow Navigator 3
English version