Sharp PN-UH861 Operation Manual page 31

TV menu
Function
Channel up
Channel down
Direct channel (Analog)
Direct channel (Digital)
Audio selection
Others
Function
Volume
Mute audio
Temperature sensor
Temperature acquisition
Controlling the Monitor with a computer (RS-232C)
Command Direction Parameter
CHUP W 0
CHDW W 0
ATDC W XYYY
DTDC W XYYYYYZZZZ XYYYYYZZZZ Enter channel number of digital TV directry.
ACHA W 0
Command Direction Parameter
VOLM WR 0-100
MUTE WR 0-1
DSTA R 0
1
2
3
4
ERRT R
Reply Control/Response contents
Up the channel number of TV by 1.
Down the channel number of TV by 1.
XYYY Enter channel number of analog TV directry.
X: Setting of antenna type
YYY: Channel number
If it is not TV, input mode is changed to TV.
X: Setting of antenna type
YYYYY: Major number or
One part channel number
ZZZZ: Minor number
If it is not TV, input mode is changed to TV.
Toggle change for audio.
Reply Control/Response contents
0-100
0-1 0: Off, 1: On
Internal temperature normal
Internal temperature abnormal has occurred and the monitor is in standby mode
Internal temperature abnormal occurred (To delete the information of
temperature abnormal, turn off the power.)
Internal temperature abnormal has occurred
Temperature sensor abnormal
Value Returns the temperature at the temperature sensors.
Indicates a temperature sensor abnormality when "126" is returned.
0 : Air, 1 : Cable
Air : 002 - 069, Cable : 001 - 135
0 : Air, 1: Cable
Air : 00001 - 65535, Cable : 00000 - 65535
Air : 0001 - 9999, Cable : 0001 - 9999
(If use one part channel number, it is 0000.)
*
-
*
-
○
-
31
E