Sharp PN-UH861 Operation Manual page 19

nSwitching the screen size
You can switch the screen size in "Wide mode" of "Advanced" on the "Picture" menu. (See page 23.)
Even when the screen size is changed, the display may remain the same depending on the input signal.
Wide
Zoom
Normal
Dot by Dot
TIPS
• Using this monitor's screen-size switching function to compress or expand the screen for commercial or public viewing in
establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be
careful.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When 4:3 video is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the video
may be lost or appear distorted. If you wish to respect the creator's intentions, set the screen size to "Normal".
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original video size, black bands may remain at the edges of the screen.
Displays image so it fills the entire screen.
The image is enlarged to fill the entire screen without changing the aspect ratio.
The edges of the image may be cut off.
Displays the image so it fills the screen without changing the aspect ratio.
Displays the dots of the input signals as the corresponding dots on the screen.
Basic Operation
19
E