Setting Up The Monitor - Siemens S7 User Manual

Colour monitor S7
preferable viewing sector
65°
0°
60°
permissible
65°
viewing sector
permissible viewing sector
Position the monitor for
optimum viewing. The viewing
distance to the monitor should
be approximately 50 cm.
The typical monitor base allows you to adjust the tilt of the display by 4° forward and by 30° back.
Depending on the situation, the use of a swivel arm or wall bracket (VESA FPMPMI), are available
from specialised dealers, may be advisable. For this purpose the monitor base must be removed
(see chapter "Removing the monitor base").

Setting up the monitor

6 - English
30°
30°
Keep ventilated areas clear.
Your monitor is folded in its packing carton in
order to save space.
Ê
The monitor surface is susceptible to scratching!
Ê
Ê
Ê
approx. 90°
and
more
Remember to maintain correct
posture.
Lay the monitor on its face on a soft
surface.
Fold out the monitor base.
Slide the latch on the base to the middle
position and engage the monitor base.
Place the monitor in an upright position.
A26361-K877-Z100-4-5E19
approx. 90°