Advertisement
Quick Links
O P E R A T I N G
INTRODUCTION:
This discharge unit is designed to measure the remaining capacity or useful energy for which a deep cycle lead
acid battery set is capable. The discharge rate, time, and shut off voltage are programmable.
Specifications:
• Operates from battery voltage, (no AC power required)
• Electronically controlled (uses microcontroller)
• Programmable voltage or time shutoff. 3 rates of discharge.
• LCD digital display for easy reading
• Built-in thermal protection
• 8 foot DC cord with cord wrap brackets
• Large 200 amp clamps for battery connections
IMPORTANT SAFETY INSTRUCTIONS:
1.) Before using discharge unit, read all instructions and cautionary markings on electric vehicle, battery,
battery charger, and all accessories using battery.
2.) Position the discharger on a foundation of stone, brick, concrete or grounded metal.
3.) To reduce the risk of fire, do not use the discharger near flammable materials or vapors.
4.) Do not expose discharge unit to rain or snow.
5.) Use of an attachment not recommended or sold by the discharge unit manufacturer may result in
a risk of fire, an electric shock, or injury to persons.
6.) Make sure DC cord is located so that it will not be stepped on, tripped over, or otherwise subjected
to damage or stress.
7.) Do not operate discharge unit with damaged cord or clamp; replace it immediately.
8.) To permit free air flow for cooling, allow eighteen inches (18") minimum between the
discharger and any wall or other equipment.
9.) Do not touch the back or sides of the case during or just after operation of the discharge unit.
A large amount of energy is being dissipated by the unit and the case will become hot.
10. NEVER disconnect the clamps from the batteries while the unit is operating. The resulting
arcing could cause an explosion resulting in personal injury, and property damage.
11. Do not operate discharge unit if it has received sharp blow, been dropped, or otherwise damaged in
anyway; take it to a qualified service center.
12. Do not disassemble discharge unit; take it to a qualified service center when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
13. Disconnect discharge unit from batteries before attempting any maintenance or cleaning.
Models, BD6812, BD1224, BD3648 Battery Dischargers
Quick Charge Corp. 1032 S.W. 22
quickcharge.com 800 658-2841 Fax (405) 632-5667
I N S T R U C T I O N S
nd
St. Oklahoma City, OK. 73109
Advertisement
Related Manuals for Quick Charge BD6812
Summary of Contents for Quick Charge BD6812
- Page 1 O P E R A T I N G I N S T R U C T I O N S Models, BD6812, BD1224, BD3648 Battery Dischargers INTRODUCTION: This discharge unit is designed to measure the remaining capacity or useful energy for which a deep cycle lead acid battery set is capable.
- Page 2 PROPER CARE AND USE OF BATTERIES: CAUTION: Always wear protective eye shields and clothing when working with batteries. Batteries contain acids which can cause bodily harm. Do not put wrenches or other metal objects across the battery terminal or battery top. Arcing or explosion of the battery can result. Do not wear jewelry when working around batteries.
- Page 3 Quick Charge, will at it’s option, repair or replace the discharger or component in question. The repaired item will then be returned, freight prepaid by Quick Charge. This warranty is void if the charger or component have been altered, changed, or repaired by anyone not authorized by Quick Charge, or if the charger or component, have been subjected to misuse, negligence, or harsh environmental conditions.