Folding And Stowing The Second And Third Row Seats - Mitsubishi Outlander 2019 Owner's Handbook Manual

FOLDING AND STOWING THE SECOND AND THIRD ROW SEATS

18
FOLDING THE SECOND ROW SEATS
1. When folding the left side second row seat, store the
seat belt for the middle seating position of the second
row seat. Refer to "Detachable center seat belt for second
row" in your Owner's Manual for help.
2. Lower the head restraint for second row middle seating
position to its lowest position.
3. Pull the strap (A) and tilt forward the head restraints for
second row outside seating position.
5. Pull the strap (B) to flip the seat
cushion forward.
6. Fold forward the seat belt buckle.
CAUTION: Do not allow any person to sit on the flipped seat
cushion, and do not place luggage on it. The seat's mounting
fitings could bend under the weight, making it impossible for the
seat cushion to be secured when it returns to the original position.
4. On vehicles with the second row
seat slide function, move the
second row seat fully backward.
Refer to "To adjust the seat
forward or backward" in your
Owner's Manual for help.
NOTE: If you do not move the
second row seat fully backward,
you may not be able to fold the
second row seat.
7. Pull up the lever (D),
then fold the
seatback forward.
UNFOLDING THE SECOND ROW SEATS
1. Raise the seatback until it locks securely into place.
2. While lifting the seat belt buckle (A), gently lower
the seat cushion. Make sure that there is a hook
(B) at the position shown in the illustration.
3. Push down the seat cushion until it locks securely
into place.
4. Make sure that all seat belt buckles are properly
positioned on the seat cushion.
5. If the center seat belt is stored:
• Pull out the detachable anchor plate (D) from
the seatback.
• Pull the small latch plate (E) slowly and
insert it into the detachable anchor plate
until a click is heard.
• Make sure that the seat belt is not twisted.
FOLDING THE THIRD ROW SEAT
(SEATING 7 PASSENGERS)
1. Remove the head restraints from the third row
seats. (Refer to "Head restraints" in your Owner's
Manual for help).
2. Pull up the strap (A), then fold the
seatback forward.
3. Stow the removed head restraints in the luggage
floor box with their front faces facing downward.
UNFOLDING THE THIRD ROW SEAT
1. Pull the strap (A), then raise the seatback
until it locks securely into place. Push lightly
on the seatback to confirm that it has
actually been secured.
2. Install the head restraints.