Related Manuals for Media5 Mediatrix Sentinel
Summary of Contents for Media5 Mediatrix Sentinel
- Page 1 Mediatrix Sentinel Quick Start Dgw v2.0.30.549 January 30, 2015 www.media5corp.com...
- Page 2 The Mediatrix Sentinel Quick Start...............3 Using the Mediatrix Sentinel on the Edge......................4 Using the Mediatrix Sentinel in the LAN without a DHCP................4 Using the Mediatrix Sentinel in the LAN with a DHCP................. 5 Logging On To the Sentinel Web Interface......................5...
- Page 3 The Quick Start will allow you to connect your cables and access the Management Interface web page for the first time. Depending on where the Mediatrix Sentinel is used in your Network, either in the LAN or on the Edge, the steps to access for the first time the Management Interface web page will differ.
- Page 4 Connect a 10/100/1000 BaseT Ethernet RJ-45 cable into the ETH5/EXT Ethernet connector of the Mediatrix Sentinel. Connect the other end of the cable into your PC. Connect the power cord to the rear of the Mediatrix Sentinel and to an electrical outlet. Flip the Mediatrix Sentinel power switch On. Result You can now use the 192.168.0.10 IP address to access your unit's management interface.
- Page 5 The Mediatrix Sentinel Quick Start Connect the power cord to the rear of the Mediatrix Sentinel and to an electrical outlet. Flip the Mediatrix Sentinel power switch On. Result You can now use the 192.168.0.10 IP address to access your unit's management interface.
- Page 6 You may not be able to log on to the Management Interface if you are using older versions. Steps In your web browser, enter the IP address used by your Mediatrix Sentinel to communicate with the Management Interface. • If your computer is connected to the ETH5/EXT Ethernet connector of the Mediatrix Sentinel, use the 192.168.0.10 IP address.
- Page 7 4229, rue de la Garlock Sherbrooke (Quebec) J1L 2C8 Canada Learn more at www.media5corp.com...
Need help?
Do you have a question about the Mediatrix Sentinel and is the answer not in the manual?
Questions and answers