Connections Between Distributed Toe Components; Secure Disposal Of Equipment - Fidelis Common Criteria Configuration Manual

Connections between Distributed TOE
Components
Fidelis Network components establish and disable secure connections over TLS to other components
within the distributed TOE using register and unregister mechanism. [ESCG] "Continue Setup" [1], [UG]
"Add a Fidelis Component" [2] and "Component Management" [2] sections describe this mechanism.
"Unregister" action removes component from TOE and disables communications with it, with exception of
"registration channel".
When a connection is first established upon successful registration of the component to K2, test functions
are available to verify proper connections. However, network connections may fail for many reasons.
Fidelis Network will continually attempt to reestablish the connection until working order is restored.
Messages are available from log files to indicate any detected errors in communications.
After restoring the network, the Fidelis Network administration will not need to perform any restoration
tasks since Fidelis Network will recover automatically.

Secure Disposal of Equipment

Before removing or discarding equipment from its operational environment, the disk needs to be scrubbed
with a wiper approved for your organization to ensure secure disposal.
Fidelis Network Common Criteria Configuration Guide Version 9.0.3 21 www.fidelissecurity.com