Nikon Z7 User Manual page 230

1 Lens hood
2 Lens hood lock mark
3 Lens hood alignment
mark
4 Lens hood mounting
mark
5 Zoom ring
6 Focal length scale
7 Focal length mark
8 Control ring
9 Lens mounting mark Use when mounting the lens on the camera.
10 Rubber lens-mount
gasket
11 CPU contacts
12 Focus-mode switch
13 Front lens cap
14 Rear lens cap
214 Technical Notes
Lens hoods block stray light that would
otherwise cause flare or ghosting. They also
serve to protect the lens.
Use when attaching the lens hood.
Use when attaching the lens hood.
Rotate to zoom in or out. Be sure to extend the
lens before use.
Determine the approximate focal length when
zooming the lens in or out.
• Autofocus mode selected: In autofocus mode, you
can rotate this customizable ring to perform a
function selected with the camera.
• Manual focus mode selected: Rotate to focus.
Used to transfer data to and from the camera.
Choose A for autofocus, M for manual focus. Note
that regardless of the setting chosen, focus must
be adjusted manually when manual focus mode
is selected using camera controls.
—
—
—