Table of Contents
Advertisement
c3 Power off delay
Playback
Menus
Image review
Standby timer
d Shooting/display
d1 CL mode shooting speed
5 fps–1 fps
d2 Max. continuous release
1–200
d3 Sync. release mode options
Sync
No sync
d4 Exposure delay mode
3 s–0.2 s, Off
d5 Electronic front-curtain shutter
Enable
Disable
d6 Limit selectable image area
FX (36 × 24)
DX (24 × 16)
5 : 4 (30 × 24)
1 : 1 (24 × 24)
16 : 9 (36 × 20)
142 Menu List
Choose how long the control panel and
camera displays remain on when no
operations are performed.
Choose the frame advance rate for low-
speed continuous release mode.
Choose the maximum number of shots
that can be taken in a single burst in
continuous release modes.
Choose whether the shutter releases on
remote cameras synchronize with the
shutter release on the master camera.
In situations in which the slightest
camera movement can blur pictures,
shutter release can be delayed until
approximately 0.2 to 3 seconds after the
shutter-release button is pressed.
Enable the electronic front-curtain to
eliminate blur caused by the motion of
the mechanical shutter.
Choose the options available when
image-area selection is assigned to the
i menu or to the command dials and a
camera control.
(defaults to 3 fps)
(defaults to 200)
(defaults to Sync)
(defaults to Off)
(defaults to Disable)
Advertisement
Table of Contents
