Serial Command List; Command Format - Kortek KT-LL84ULFX-PD Service Manual

5.2

Serial Command List

Description
Power Key Off
Power Key On
Power status
Mute Off Execute
Mute On Execute
Mute status
Volume Value
Current source status
Source change to VGA
Source change to DVI
Source change to HDMI1
Source change to HDMI2
Source change
to DISPLAYPORT
5.3

Command Format

5.3.1 Direct command
It is to send a command to the product to perform the action corresponding
to the command.
Statement form: [HEAD][SET ID][COMMAND][END]
Ex) Power On: [K:][ALL][PON][.] → K: ALLPON.
• [HEAD]: Represents the beginning of a statement. Put 'K:' always.
• [SET ID]: Specifies the product that perform as the command. Put 'ALL' or
• [COMMAND]: It always consists of 3Bytes.
• [END]: Represents the end of a statement. Put a '.' always.
5.3.2 Adjustment command
It is to deliver the command which enables to adjust value in the product.
Statement form: [HEAD][SET ID][COMMAND][VALUE][END]
Ex) To adjust the volume to 50: [K:][ALL][CON][050[.]→ K: ALLVOL050.
• [HEAD]: Represents the beginning of a statement. Put 'K:' always.
• [SET ID]: Specifies the product that perform as the command. Put 'ALL' or
• [COMMAND]: It is always composed with 3Bytes.
• [VALUE]: Adjusted value. It consists of 3Bytes ranging from 000 to 100.
• [END]: Represents the end of a statement. Put a '.' always.
REV 0.1
Command Value
POF
PON
PWR Off : 000, On : 001
MOF
MON
MUT Off : 000, On : 001
VOL 0 ~ 100 0 ~ 100
VGA : 000, DVI:001, HDMI1:005,
SRC
HDMI2, 009, DisplayPort: 006
SPC
SH1
SH2
SH4
SH3
ID number of the product. (ID range: 000 to 100)
As for command, refer to
ID number of the product. (ID range: 000 to 100)
As for command, refer to
Reply
page 28.
page 28.
Service Manual
40