Wiring Gridscan/Mini - Cedes UPS Plus Installation And Operation Manual

Universal Power Supply Plus (UPS Plus)
6.4

Wiring GridScan/Mini

Follow the wiring diagram (Figure 3) to connect e.g GridScan/Mini with a single element detection signal to the door
controller. For the functional description for the GridScan/Mini safety light curtain please refer to the manual on
www.cedes.com.
Power
LED
Green
ON
ON Power OK
OFF
OFF No power
Sensor connection
Test
V V V V V
Figure 3: Wiring of the UPS Plus with the GridScan/Mini safety light curtain
6
Input 1 Input 2 Outputs
Orange Red
Output Power
relay 2
V V V V V V
V V V V
UPS Plus LED definition:
- Power LED (green) is ON, if supply voltage is connected correctly.
-
- Input LED (orange) is ON, if the protected area is obstructed.
- Input LED (red) is ON, if the protected area is obstructed.
Buzzer definition:
- Buzzer is OFF, if the protected area (light curtain) is not obstructed.
Output
- The buzzer can be turned on/off by using a switch.
relay 1
Relay definition:
In the configuration shown, the relay is energized if there is
V V
voltage applied and there is no obstruction. Contact between
COM and NO (safest connection).
NO
NC
COM
L
N
Protective
ground
NO
NC
COM
brown
U
SP
blue
GND
black
Output
green
Single element
detection
white
Test input
GridScan/Mini
gray
Logic selector
GridScan/Mini
output relay 1
Supply voltage:
To the
20 ... 265 VAC
door controller
20 ... 375 VDC
Single element detection
output relay 2
GridScan/Mini
safety light curtain
Input test signal
from the
door controller
English
© CEDES | V 1.0