Medisana Sleepace Instruction Manual page 15

3.1 Activating and positioning the sleep monitor
Depending on the position of the magnetic cover
active or inactive mode:
The Sleepace Sleep Monitor needs to be positioned correctly between mattress and
sheet in order to function properly:
1. Remove the magnetic cover
2. Put the piezo strap
height of your chest. The housing
sheet).
3. Replace the magnetic cover
Therefore turn the magnetic cover by 180° accordingly (the green LED
up shortly).
4.
Lay down in your bed.
Inactive mode
.
7
between mattress and sheet as shown approximately at the
2
4
in that way, that the device is in active mode.
7
the Sleepace Sleep Monitor is in
7
will be fixed on the side of the bed (on the
3 Operating
Active mode
will light
5
GB
15