Mimitakara JAPAN DP-6K52 Manual

Full-Digital Bluetooth
Hearing Aid

Accessories Listing

3
2
1
5
1. Bluetooth Hearing Aid with Earphone x 1
(Left- Blue / Right- Red)
2. Storage Case x 1
3. USB Adapter x 1
4. Micro USB cable x 1
5. Clearing Brush x 1

Features

Volume Controller
Mode Switch /
Bluetooth Pairing
Indicator(Built-in)
Power Switch
(Top - On, Bottom -Off )
Micro USB
Charging Socket

Wearing Instruction

1. Insert the Red earphone
into the Right ear and
Blue earphone into the
Left ear. Insure that the
ear buds are tightly
fitted in the ear canal to
avoid feedback noise.
2. Turn the hearing aid on and start adjusting the
volume to suit your hearing loss needs.
3. Clip the hearing aid on the collar/pocket to avoid
the microphone from coming into contact with
4
other moving parts that may amplify static sound.
Ensure the microphone of the hearing aid is not
covered by any obstructions to get the best
quality sound to be received.
Earphone

Powering On and Off the hearing aid

1. To Turn On the hearing aid switch the switch to
Microphone
the Top.Once properly turned on there will be an
indicator that will flash Red and Blue three times.
You will then hear your
surrounding's sound
gradually increasing
from a low volume to
a your preset volume.
The Blue light will
continuously flash
which indicates that the hearing aid is working.
Collar Clip
2. To Turn Off the hearing aid switch the switch \
to the Bottom. Once properly turned on there
will be an indicator that will flash Red and Blue
three times. You will than hear your surrounding's
sound gradually fade from your preset volume.
※ The hearing aid will keep the last preset setting
so when you power on the hearing aid again, it
will automatically preset the same mode as the
last time you turned off the hearing aid.
※ When the battery is too low, the device may not
be turn on. Please charge the device and then
turn on the device.
1. Connect the provided micro USB cable's USB
head to the USB adapter then plug the USB
adapter to an AC outlet before connecting the
micro USB head to the hearing aid for charging.
2. A Red light will light up on the hearing aid
indicating its recharging, once fully charged the
red light will be turned off automatically.

Warning:

※ Please don't recharge the hearing aid in high
temperature environment or in direct sun light.
※ When RED light on the hearing aid start flashing,
it indicates that hearing aid is almost out of power.
We suggest you recharge the battery at this point
to preserve the batteries long life span.
Indicator(Built-in)

How to Charge