Safety Notes; Conditions Of Use; Emergency; Power Supply - Alcatel-Lucent 9362 Enterprise Cell Getting Started Manual

V2.2 wcdma b2/b5
Table of Contents

Advertisement

9362 Enterprise Cell

Safety Notes

GENERAL
: Please read this Getting
Started Guide carefully before using the
9362 Enterprise Cell. The 9362 Enterprise
Cell's purpose is to provide improved
mobile signal coverage inside a building.
Do not use this device for any other
purpose, as doing so may be dangerous.
POWER
: This product is intended to be
supplied by a Listed Limited Power
Source. This can be performed by a
power adapter output rated 12 VDC,
minimum 2.0 A or a PoE rated 48-56
VDC, minimum 0.6 A. These units shall be
"LPS" marked and rated
ambient temperature of 45° C.

CONDITIONS OF USE

Enterprise Cell and all its components
(including cables and power adaptor)
should be placed in a dry, indoor area, at
elevated heights such as on top of
shelves, cabinets, etc. I t should be kept
away from any wet or damp
environments; such as kitchens,
bathrooms, laundry rooms or any other
areas with exposure to moisture, sprays,
drips, or running water. For the safety of
stored data, it should not be placed near
magnetic devices such as audio or video
tapes, diskettes or credit cards. While in
service, the antenna should not be
collocated with any another antenna or
transmitting device. Altitude 2000 m max.
Ambient temperature 45°C max.

MEDICAL DEVICES

Enterprise Cell contains a radio
Getting Started Guide
for a minimum
: The 9362
: The 9362
transmitter similar to other residential
radio transmitters. Medical devices such
as pacemakers and hearing aids may be
affected, unless precautions are taken,
when using this device. Please contact
your General Practitioner for additional
safety guidelines.
COMPLIANCE WITH APPLICABLE
EXPOSURE LIMITS
Enterprise Cell has a radio emission level
well below regulatory limits for public
exposure to radiofrequency emissions. I t
thus complies with the European
Recommendation 1999/ 519/ EC of 12 July
1999.
The European standard EN 50385
specifies the conditions for compliance
with regulatory limits for public exposure;
in particular in the limiting case where the
user would be located at less than 20 cm
of the unit in operation, the Specific
Absorption Rate (SAR) must be less than
2 W / kg.
The 9362 Enterprise Cell, having a
maximum radio output power of 0.25 W,
is consistent with EN 50385 even when it
is in this maximum power and in the
immediate vicinity of the human body.

EMERGENCY

: The 9362 Enterprise Cell
does not operate during instances of
power loss. To make emergency calls,
please use a mobile or land line phones.

POWER SUPPLY

: Ensure that the
voltage specified corresponds to the
power socket to which you connect it. I n
case of power loss (and therefore loss of
: The 9362
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents