9362 Enterprise Cell
Q
S
UICK
1. Find a suitable location
To get the best results from
the Enterprise Cell it should
be placed high up and as
centrally as possible, since it
emits a radio signal similar to
a Wi-Fi router.
Avoid placing it near metallic
objects, windows or other
radio transmitters.
2. Install unit
The unit can stand on a flat
surface or be mounted on a
wall or ceiling
3. Connect Ethernet cable
Plug one end of the included
Ethernet cable into a port on
your router. Plug the other
end of the Ethernet cable into
the Router port of the
Enterprise Cell.
–
Getting Started Guide
ETUP
4. Connect power cable
Connect one end of the power
adaptor into a power socket
and the other into the
Enterprise Cell. The unit
should start up automatically
and begin the auto-
configuration process.
5. Auto-configuration
The auto-configuration
process takes about 15
minutes and involves the
Enterprise Cell connecting to
your I nternet Service
Provider, updating its software
and rebooting. During this
time the I nternet icon
be white and pulsing. When
the I nternet icon
Service icon
white the process is complete.
will
and the
are steady and
5