4 Press and hold down the button on the wireless
switch.
The green LED lights up.
5 Release the button again on the wireless switch.
The blue LED lights up.
4 Installing software
Requirement: The receiver is connected and the
USB driver is installed (see 3 "Installing the USB
driver"). The "Cherry_EHS-RF_Software" folder is
on your computer.
1 Link the "RadioMonitor.exe" file on your desktop
for later access.
2 Start the link to "RadioMonitor.exe".
If "dotNET Framework V4" is not installed on your
computer you will receive a message. Load
"dotNET Framework V4" from the CD and install
it.
The "Set_Check_COM" window appears.
3 Select the COM port of the receiver from the list.
(This is usually the one with the highest number.)
11