Installing The Usb Driver - Cherry Energy harvesting wireless switch Operating Manual

3 Installing the USB driver

System requirements:
Windows XP, Vista or 7, USB 2.0 connection.
1 Copy the "Cherry_EHS-RF_Software" folder from
the CD onto your computer.
2 Connect the receiver.
• Comfort evaluation kit:
Plug the receiver stick into the computer so that
the components (LEDs) can be seen on the cir-
cuit board. Use a USB hub or an extension cable
if necessary.
• Engineer evaluation kit:
Connect the receiver circuit board to the com-
puter using the USB cable provided.
The yellow LED flashes on the receiver.
The device driver installation prompts you to
install the driver software. The drivers for 32- and
64-bit variants are located in the "Cherry_EHS-
RF_Software/Driver" folder.
3 Follow the instructions in the installation wiz-
ard. If problems arise, you will find detailed video
instructions on the CD.
The yellow LED lights up on the receiver.
10