Advertisement
Front Panel
The buttons are located on the rear.
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Standby
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function.
/
· · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume.
Rear Panel
(USB)
· · · · · · · · · · · · · · ·
Connect to a USB device.
PORT. IN (Portable)
· · ·
Connect to a Portable device.
OPT. IN (Optical)
· · · · · ·
Connect to an Optical device.
SJ2.DAUSLLK_SIM (Sheet)_MFL70585624.indd 3-4
1
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a
Connect the power cord of the sound bar and
the wireless subwoofer to the outlet.
b
Turn on the sound bar.
c
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make emit any sound, you
can try connecting it manually.
a
Press Pairing button on the rear of the wireless
subwoofer.
y The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the Pairing button.)
b
Turn on the sound bar.
c
Pairing is completed.
y The green LED on the rear of the wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
1 m
2
TV Connection
a
Connect the sound bar to the TV using
an Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
a
Connect to the external device as follows.
(Set-top Box,
Player etc.)
TV
b
Set the input source by pressing OPTICAL on
the remote control or pressing F repeatedly.
Additional Information
Specification
Refer to the main label.
Power requirements
Power
Refer to the main label.
consumption
Dimensions
Approx. 660.0 mm x 56.0 mm
(W x H x D)
x 99.0 mm With foot
Bus Power Supply
5 V 0 500 mA
(USB)
Amplifier
(Total RMS
160 W RMS
Output power)
Design and specifications are subject to change without
notice.
Remote control
STANDARD/BASS BLAST: Selects the sound effect.
DRC ON/OFF : Dynamic Range Control optimizes the
volume level of compatible Dolby Digital content.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
2018-09-17
9:15:56
Advertisement
