Moffat MUF06DMRWW Owner's Manual page 9

Reversing the freezer door
6. Align the hinge with the screw holes on the door and the hole
in the top edge of the door. Slide the pin through the hole in
the hinge and into the hole on the top edge of the door. Use
the screws to attach the hinge to your freezer. Place the hole
cover over the hinge opening on the other side of the door.
Hinge
Providing the correct power source
Check your local power source. Your freezer requires a 115 V, 60 Hz power supply.
Make sure that:
The power outlet accepts a 3-prong grounding plug. The
third prong on the power cord plug grounds your freezer to
minimize the possibility of electric shock. Do not modify the
power plug.
You DO NOT plug anything else into the same power outlet
as your freezer. You may overload the circuit which can
cause a fire.
Using a 3-prong plug and outlet
Pin
3-prong outlet
3-prong Outlet cover
plug
(cont.)
You DO NOT use an extension cord. If your freezer is too far
from the power outlet, move your freezer or have a electri-
cian install a plug closer to your freezer.
The power outlet cannot be turned off with a switch or pull
string.
Grounding lead
Grounding Outlet cover
adapter
Using a grounding adapter
Screw
Outlet
9