Moffat MUF06DMRWW Owner's Manual page 7

Leveling your freezer
Leveling your freezer is important. If you do not level your
freezer during installation, the doors may not close or seal
correctly which can cause cooling, frost, or moisture prob-
lems.
To level your freezer, rotate the leveling feet clockwise (to
raise) your freezer or counter-clockwise (to lower it).
Note: To make it easier to adjust the feet, have someone push
against the top of your freezer to tilt it slightly.
Reversing the freezer door
Unplug your freezer before you reverse the door. Failure to
unplug your freezer may result in serious injury or death from
electrical shock.
To avoid personal injury and property damage, get another
person to help you reverse the door.
You will need the following tools to reverse the freezer door:
Flat-blade screwdriver
Phillips screwdriver
5/16" socket wrench
1. Unplug your freezer.
2. Remove the hinge cover, then remove the top hinge screws
and hinge from your freezer. Remove the pin from the top
edge of the door, then remove the hole cover from the other
side of the freezer.
Tape
Putty knife
Lower
Raise
Hole
cover
Top hinge
Hinge cover
7