SMS-BPW1-A00 Contents 1. Before Using the Device ............................1 1.1 Indications For Use ..............................1 1.2 Important Safety Information and Precautions ....................1 1.3 About Blood Pressure ............................2 2. Know Your Device ..............................2 3. Instruction For Use ..............................3 3.1 Before Taking a Measurement ........................
SMS-BPW1-A00 1. Before Using the Device 1.1 Indications For Use This wrist blood pressure monitor is intended to be used to measure blood pressure and pulse rate from the wrist by using the oscillometric method, at home or in medical centers.
SMS-BPW1-A00 1.3 About Blood Pressure BLOOD PRESSURE INDICATOR CHART (World Health Organization (WHO) Blood Pressure Indicator) * Consult Your Physician When systolic and diastolic pressure falls into different categories, the higher pressure determines color code. Blood pressure measurements determined with this device are equivalent to those...
SMS-BPW1-A00 USB Port (only for charge) 3. Instruction For Use 3.1 Before Taking a Measurement • For most accurate results, measurements should be taken in the same circumstances and at the same time every day. • The unit can be applied to either wrist, but preferably the left. Use the same wrist for each measurement.
SMS-BPW1-A00 • Comfortably seated • Legs uncrossed • Feet flat on the floor • Back and arm supported, • Keep the device at the same level as your heart. • Relax as much as possible and not talk during the measurement.
SMS-BPW1-A00 authorized distributor. Use only authorized parts and accessories. 5. Troubleshooting If you see any of these symbols displayed on screen, perform the corresponding correction: Symbol Cause Correction wearing loose wearing inappropriate Not with the cuff. Wrap the cuff right too loose.
SMS-BPW1-A00 RF emissions Class B The device is suitable for use in all CISPR 11 establishments other than domestic and those directly connected to the public low Harmonic Not applicable voltage power supply network that supplies emissions buildings used for domestic purposes.
SMS-BPW1-A00 Caution: Changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SMS-BPW1-A00 10. Warranty Information ■ The device is warrantied to be free of manufacturing defects in workmanship and materials for a period of one year from the date listed on the purchase record, when used in accordance with the instructions provided with the device.
Need help?
Do you have a question about the BPW1 and is the answer not in the manual?
Questions and answers