qpcom QP-WR254G Quick Install Manual

QP-WR254G
802.11 b/g Wireless Router
Check for Packing List
1. One Wireless G BroadBand Router
2. One Power Adapter
3. One Ethernet Network Cable
4.One Set -up CD-ROM with User 's
Manual
5. One Quick Installation Guide
1
Aplication Diagram
2
Connect the 802.11g Wireless Router
Before you begin, ensure
1
DSL/Cable modem supplied by your IP Provider, and PC
Subscribed line
ADSL/Cable
Modem
Existing Connection
ARM914
that the Wireless Router, the
Power
To PCs
To Internet
Quick Install Guide
Connect your DSL/Cable Modem to the Internet
2
on the Wireless
Connect an Ethernet
3
on the back of the Wireless Router to the Ethernet
4
Turn on the DSL/Cable
5
Then turn on your wireless
Check the LEDs:
6
The Power, Internet and W LAN LEDs should be ON
For each active LAN (PC) connection, the LAN
7
Turn on your PC.
Notes
Before setting up the Wireless Router, make sure your Pcs are
configured to "obtain an IP or (TCP/IP) address
automatically".
For Windows 98 / ME / Macintosh
Please refer to the User's Guide found on the CD.
For Windows 2000 & XP
Click start click Control Panel
Internet connections
Connection Properties
Make sure the box next to Internet Protocol (TCP/IP) is checked.
Click the Internet Protocol (TCP/IP) and
Select "Obtain an IP address automatically".
Select "Obtain DNS server address automatically".
Then click OK to complete the PC configuration.
Restart your computer
2
Router Configuration (for Internet Access)
For Windows 2000 & XP users, your computer should
8
obtain an IP Address automatically from the Wireless
Router's DHCP Server, after you've done the above
steps and restarted
R outer using a standard
cable to one of the LAN
modem first.
router .
Network and
(Right- click on) Local area
..
your computer
www.qpcom.com
port
RJ-45
ports