Running The Application - Philips ISP1581 User Manual

Philips Semiconductors

5.3.2. Running the Application

Using this application software, you can capture and preview the input A/V source. It also
provides advanced hardware debugging functions.
Preview
If you want to preview the input A/V source before storing it to the hard disk, use the Preview
function.
1.
2.
Capture
The Capture function can be used to capture the input A/V source and store this video signal in
MPEG2 format on the hard disk of your PC.
1.
2.
3.
4.
User manual
To launch the preview operation and activate an ActiveMovie Window, click the Start button
in the Preview group.
To terminate the preview operation, click the Stop button.
To start the capture operation, click the Start button in the Capture group.
The Open dialog box appears; see Figure 5-4. Enter a file name for the movie or select an
existing file, if you want to overwrite an existing file.
Figure 5-4: Open Dialog Box
Click Open. This will launch the capture operation.
To terminate the capture operation, click Stop.
Rev. 03.00 — 12 April 2004
ISP1581 Hi-Speed USB MPEG2 Encoder Reference Kit
UM10016_3
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
11 of 28