Download Print this page
Blumfeldt 10028488 Manual
Blumfeldt 10028488 Manual

Blumfeldt 10028488 Manual

Hide thumbs Also See for 10028488:

Advertisement

Available languages

Available languages

Quick Links

Dreibein-Schwenkgrill
10028488

Advertisement

loading
Need help?

Need help?

Do you have a question about the 10028488 and is the answer not in the manual?

Questions and answers

Summary of Contents for Blumfeldt 10028488

  • Page 1 Dreibein-Schwenkgrill 10028488...
  • Page 2 Sehr geehrter Kunde, wir gratulieren Ihnen zum Erwerb Ihres Gerätes. Lesen Sie die folgenden Hinweise sorgfältig durch und befolgen Sie diese, um möglichen Schäden vorzubeugen. Für Schäden, die durch Missachtung der Hinweise und unsachgemäßen Gebrauch entstehen, übernehmen wir keine Haftung. Sicherheitshinweise •...
  • Page 4 Montage des Dreibeins Benötigtes Werkzeug: Schraubenschlüssel, Schraubendreher Schritt 1: Verbindung der mittleren Stahlrohre mit dem Kopfstück 1. Stecken Sie die Stahlrohre (B1, B2) in die Schafte des Kopfstücks (E). Die Löcher müssen übereinander liegen. 2. Führen Sie die Schrauben (S1) durch die Löcher.
  • Page 5 Montage der Feuerschale Schritt 4: Befestigung der Standfüße Führen Sie einen Standfuß (A) mit den beiden Gewinden durch die Bohrungen der Schale. 1. Legen Sie von oben zwei Unterlegscheiben (S6) auf die durchgeführten Gewinde. 2. Schrauben Sie jeweils eine Sechskantmuttern (S2) auf das Gewinde.
  • Page 6: Security Instructions

    Dear Customer, Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the operation and installation instructions are not covered by our warranty and any liability.
  • Page 8 Assembly of the tripod Required tools: Wrench, Screwdriver Step 1: Connecting of the upper leg parts with the tripod head 1. Stick the upper leg parts (B1, B2) into the shafts of the tripod head (E). The screw holes must be level. 2.
  • Page 9 Assembly of the fire pit Step 4: Fastening the bowl legs 1. Place a bowl leg with its two threads through the holes in the bowl. 2. Place two wahers (S4) on the respective threads from above. 3. Fasten a hexagonal nut (S1) on the respective thread.