To Stop The Engine - Branson 25 SERIES Manual


1
-
BRANSON 25 SERIES
(1) Range Shift Lever
7. Once the engine has started, take
your hand off the ignition switch.
8. Increase the engine to about 1,500
rpm and warm it up for about five
minutes without a load.
BRANSON 25 SERIES 트랙터-영문판-05.ind12 12

TO STOP THE ENGINE

BR25O523A
1. Put the acceleration lever on
LOW, and turn the main switch to
"OFF".
2. Put shuttle lever, main gearshift
lever and PTO shift lever to "N".
put PTO ON/OFF switch in to the
"OFF" position and front wheel le-
ver to the "OFF".
3. Put the hitch control lever on
"DOWN"
When stopping the engine,
•
never stop it with the reducer
lever.
Acceleration
lever to LOW
After stopping the engine,
•
Main switch to
make sure to apply the park-
OFF and
ing brake.
remove the key
BR25O524A
For warming-up operation,
•
strongly step on the brake
pedal and pull your parking
brake.
When leaving the tractor, park
•
the tractor in a flat and safe
place, put the shuttle lever
and the main shift lever to "N",
and block the tires.
[Otherwise]
The tractor may move and cause
an accident. Always set the park-
ing brake.
CAUTION
NOTE
WARNING
2015-04-29 오후 1:46:25