7. Setting up 'Auto-hang up'
If 'AUTO-HANG UP' mode is activated, you can only end a call
by replacing the handset on the base. If deactivated, you must
press
to hang up.
1. Press 'MENU/OK' and
press 'MENU/OK' again.
2. Press
to select 'AUTO-HANG UP', and then press
'MENU/OK'.
3. Press
or
4. Press 'MENU/OK' to save your selection.
5. Press
to return to standby mode.
8. Setting the handset language
1. Press 'MENU/OK' and
press 'MENU/OK' again.
2. Press
to select 'LANGUAGE', and press 'MENU/OK'.
3. Press
or
4. Press 'MENU/OK' to save your selection.
5. Press
to return to standby mode.
9. Activating 'Baby monitor' mode
This mode lets you leave a handset in one room and use
another to listen in to that room. (Requires 2 handsets
registered to the same base.)
to display 'PERSONALISE', then
to select 'ACTIVATE' or 'DEACTIVATE'.
to display 'PERSONALISE', then
to select the language you want.
35