Pretorian APPlicator Instructions Manual page 4

First of all, plug up to four wired switches into the sockets provided (A). Any switch with a standard
3.5mm plug may be used, including sip/puff, pad switches, grasp switches etc.
The default modes for the sockets are given in Table 1:
Socket
1
2
3
4
Table 1: Default Socket Modes
Although the default settings cover the vast
majority of switch adapted Apps, you may wish
to make some changes to suit your preferences.
To change any setting, first select the channel
which you would like to change by repeatedly
Accessing switch-adapted Apps.
Default Mode
Space
Enter
~1
~3
Mode Setting
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
J
L
P
R
T
U
pressing the Channel button (F) until the LED (B)
adjacent to that channel is illuminated.
The current setting is then shown on the display
(C). To change, press the Mode button (G) until
the desired setting appears on the display.
Table 3 shows the available settings. After a
few seconds the display is extinguished to save
power and the setting saved.
This process may be repeated for any number of
sockets.
Any combination of settings can be programmed,
including duplicates, should you wish to use
APPlicator for turn-taking and cooperation.
Class Function
Keyboard Numeral 0
Keyboard Numeral 1
Keyboard Numeral 2
Keyboard Numeral 3
Keyboard Numeral 4
Keyboard
Keyboard
Keyboard
Keyboard
Keyboard Up Arrow
Keyboard Down Arrow
Keyboard Left Arrow
Keyboard Right Arrow
Op. System Keyboard
Media Play/Pause
Media Skip Forward
Media Skip Back
Media Volume Up
Media Volume Down
Media
Media Timed Play 10s
Media Timed Play 30s
Switch Control
Switch Control Enter / Home
Space
Enter
~1
~3
Mute
Home
Table 3: Switch Functions