Table of Contents
Advertisement
Description
Received Signal Too Weak
101
/ Measuring Time Too Long
102
Received Signal Too High
201
Too Much Background Light
202
Laser Beam Interrupted
301
Temperature Too High
302
Temperature Too Low
401
Hardware Error
402
Unknown Error
Error Codes
Corrective Action
Use target plate or change target surface.
Target too reflective, use target plate or
change target surface.
Reduce background light on target area.
Remove obstacle and repeat measurement.
Allow device to cool to operating.
Allow device to warm up to operating
temperature.
Switch on/off device several times. If
error cannot be cleared return defective
instrument to Service Center or distributor.
See warranty information.
Contact Service Center or distributor. See
warranty information.
Advertisement
Table of Contents
Need help?
Do you have a question about the Cubit and is the answer not in the manual?
Questions and answers