Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Plott Cubit
Summary of Contents for Plott Cubit
- Page 1 CUBIT...
- Page 2 Welcome to CUBIT Mark Button LCD Display Laser Beam Window Main Button Ball Reference Light Wheel USB Plug...
- Page 3 Short Press Main Button Short press Main Button to Power On. to switch the reference. In GUIDE Mode Long Press Main Button supports UP and DOWN for 1-3s and release 2references. to Clear the Measure Result. Long Press Main Button In Non-GUIDE Mode for over 3s to Power supports UP and DOWN...
- Page 4 2seconds once the main button is pressed while PLOTT the CUBIT is powered off. Laser Measurement View CUBIT will enter laser measurement view once the laser measurement button is pressed. ndicates the direction of the following values are for the LEFT LASER (X LASER currently).
- Page 5 Indicates the CUBIT is working in wheel mode. Indicates the CUBIT is using FEET as its unit. * FEET is the default unit. * Working with Plott App and it can help to change to other units. GUIDE View CUBIT will enter laser measurement view once the laser measurement button is pressed.
- Page 6 STEP Turn ON the CUBIT STEP PLOTT Connect your CUBIT in the Device Management Page of the App. STEP PLOTT “THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY STANLEY TOOLS IS UNDER LICENSE. OTHER...
-
Page 7: Specifications
Specifications 0.3 m to 20 m (0.99ft to 65 ft.) Range (Two-directions) Measure direction X/Y(Two-directions) 0.5<1 mW Measuring accuracy (± 3.0 mm≤10m) Typ.: ± 3.0 mm* Smallest unit displayed 1 mm (5/128’’) (Two-directions) Laser class Laser type 620-690 nm, Power<1 mW After 30 s Laser / Backlight automatic switch-off After 90 s... -
Page 8: Error Codes
Error Codes Description Corrective Action Received Signal Too Weak Use target plate or change target surface. / Measuring Time Too Long Target too reflective, use target plate or Received Signal Too High change target surface. Too Much Background Light Reduce background light on target area. Laser Beam Interrupted Remove obstacle and repeat measurement. -
Page 9: Standard Warranty Terms
Warranty Standard Warranty Terms The warranty period for the CUBIT is 12 months from the date of purchase. Northwest Instrument, Inc. (Seller) warrants this instrument made by Northwest Instrument to be free from manufacturing defects in materials and workmanship. For claims to be made under this warranty the instrument must be inspected by Northwest and the defect must be proven to Seller’s satisfaction. -
Page 10: User Safety
The CUBIT Products emit a visible laser beam as shown in Figure A. The laser beam emitted is Laser Class 2 per IEC 60825-1 and complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50,... -
Page 11: Battery Safety
PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical and electronic waste under the WEEE Directive. DECLARATION OF CONFORMITY CUBIT declares that the CE Mark has been applied to this product in accordance with the CE Marking Directive 93/68/ EEC. - Page 12 PLOTT 69 King street, Dover, NJ, 07801 U.S.A Tel:(973) 347-6830 E-Mail:hello@letsplott.com www.LETSPLOTT.com...
Need help?
Do you have a question about the Cubit and is the answer not in the manual?
Questions and answers