Other Functions - Sherwood Newcastle R-965 Operating Instructions Manual

OTHER FUNCTIONS

Compressing the dynamic range
(Dolby Digital sources only)
• This function compresses the dynamic range of
previously specified parts of the Dolby Digital sound
track(with extremely high volume)to minimize the
difference in volume between the specified and non-
specified parts.
This makes it easy to hear all of the sound track when
watching movies at night at low levels.
While the digital signals from the Dolby
1
Digital program source are being input.
• "DYNAMIC : ~" is displayed for several seconds.
• If the dynamic range mode disappears, start again
from the above step .
Operating the sleep timer
• The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting off.
• To set the receiver to automatically turn off after the
specified period of time.
STANDBY
AUD2
SLEEP D/A
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1
• Each time this button is pressed, the sleep time
changes and disappears in several seconds as follows:
10 20 30 60
Unit : minutes
• While operating the sleep timer, "
• When the sleep time is selected,
all display panels of Sherwood components connected
by the DIGI LINK III are dimly lit.
POWER ON
90 OFF
" lights up.
40
Adjust the dynamic range as desired.
2
• Each time the MULTI CONTROL knob is rotated,
the compression rate changes as follows:
• In some Dolby Digital software, this function may
not be available.
Adjusting the brightness of the
fluorescent displays
STANDBY
AUD2
SLEEP
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1
• Each time this button is pressed, the brightness of all
fluorescent displays of Sherwood components
connected by the DIGI LINK III changes together as
follows:
ON dim OFF
• In the display OFF mode, pressing any button will
restore the display ON mode.
POWER ON
D/A