Samsung VL Series Full Manual page 22

To activate voice recognition, follow these steps:
1
Press the Bluetooth
mode.
1-1
If you have not done so already, set up a Bluetooth connection between the speaker and
your mobile device.
• To connect a mobile device, please see
2
Press and hold the
until the LED turns cyan (blue-green).
3
When the LED turns cyan, the device's voice recognition function is activated.
Speak directly into the Dial Controller to use the voice recognition service.
 For S voice on Samsung Galaxy devices, be sure to release the lock pattern to use the function.
CAUTION
9 Maintain a distance of at least 0.6 inches between your face and the Dial Controller when using the voice recognition
service.
button on the right side of the speaker to switch to Bluetooth
Multi-Function button on the Dial Controller for 2 or more seconds
ENG - 15
[Connecting to Bluetooth]
Mobile device
2 Sec
.
Click here.