Channel Level - Bel Canto PL-1 User Manual

08 The Initial Settings Menu
3 Use the joystick (up/down) to change
the distance.
• When you change the distance settings
of the front left (L) or front right (R)
speakers, all the other speaker dis-
tances change relative to it.
• Front left/right (L/R) speakers can be set
from 1 ft. to 30 ft. in 0.5 ft. increments.
• Center speaker (C) and subwoofer (SW)
can be set from – 6.5 ft. to +6.5 ft.
relative to the front left/right speakers
• Surround left/right (LS/RS) speakers can
be set from –20 ft. to +6.5 ft. relative to
the front left/right speakers.
4 Move the cursor left to go back to the
speaker list if you want to modify
another speaker, or press ENTER to exit
the Speaker Distance screen.
• Speaker Distance settings do not affect
SACD playback.

Channel Level

• Default setting: Fix
You only need to make this setting if you
the 5.1 channel analog outputs.
joystick (up/down) to adjust the channel
This setting does not affect digital audio
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
66
En
Audio Output Mode
Fix
Speaker Installation
Variable
Speaker Distance
Channel Level
When set to Fix, the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
You can set the individual channel levels
between –6dB and +6dB using the test tone
output as a guide to set the correct levels.
Adjust the levels until the output level from
all channels sounds the same from your
usual listening position.
Automatic: Select Auto to start the test tone
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
onnected this player to your amplifier using As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
output level of the current speaker. Note that
the test tone is not output from the
subwoofer. Move the joystick left to exit the
test tone sequence, or ENTER to save the
settings and exit the channel level setting
screen.
7
54
Auto
L 0.0dB
0.0dB
C
0.0dB
R
0.0dB
RS
0.0dB
LS
SW 0.0dB
Auto
0.0dB
L
C 0.0dB
0.0dB
R
0.0dB
RS
0.0dB
LS
0.0dB
SW