Bel Canto PL-1 User Manual page 39

06 The Audio Settings Menu
This Menu is available by using
the joystick to move the cursor
one step below "Virtual Surround"
Set the distance for each speaker .
composite video outputs.
Audio Settings
Speaker Distance L
Speaker Distance C
Speaker Distance R
Speaker Distance LS
Speaker Distance RS
Speaker Distance SW
• Use the joystick (up/down) to select a
speaker.
• Use the joystick (left/right) to adjust the
distance from your listening position to
that speaker.
Front left/right (L/R) speakers can be set
from 1.0 ft. to 30 ft. in 0.5 ft. increments.
Center speaker (C) and subwoofer (SW) can
be set from – 6.5 ft. to +6.5 ft. relative to the
front left/right speakers
Surround left/right (LS/RS) speakers can be
set from –20 ft. to +6.5 ft. relative to the front
left/right speakers.
When you adjust the front left (L) or front
right (R) speaker, all the other speaker
distances are adjusted relative to that
speaker.
6 Press ENTER to make the settings and
exit the audio settings screen.
• The speaker distance settings have no
effect on SACD playback.
• You can't adjust the channel level for
any speakers that are set to Off in the
Speaker Installation menu screen
(page 64).
• The Fix setting is equivalent to setting
all the channel levels to +6 dB. There-
fore, the Variable setting will usually
sound quieter than the Fix setting.
50
En
3/3
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
7
38