Audio Drc, Virtual Surround; Video Adjust; The Audio Settings Menu - Bel Canto PL-1 User Manual

The Audio Settings Menu

Audio DRC
• Default setting: Off
When watching Dolby Digital DVDs at low
volume, it's easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you're listening to. If the
material doesn't have wide variations in
volume, you may not notice much change.
1 Press SETUP and select 'Audio Set-
tings' from the on-screen display.
Audio Settings
Play Mode
Initial Settings
2 Highlight Audio DRC, then use the
Joystick (left/right) to change to 'On' or
'Off', as required.
Audio Settings
Audio DRC
Virtual Surround
Channel Level
3 Press ENTER to make the setting and
exit the Audio Settings screen.

Video Adjust

Disc Navigator
Setup Navigator
1/ 2
Off
Off
Fix
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to
Dolby Digital > PCM.
• The effect of Audio DRC depends on
your speakers and AV receiver settings.
7
36
06
47
En