Initial Settings - Sherwood Newcastle V-768 Manual

The initial settings of the unit at the factory can be modified as desired later.
Even after the power of the unit is switched to the standby mode, the initial settings are stored in memory until it is changed
the next time.
In the stop mode, press the SETUP button
to enter the setup mode.
1
• The setup menu screen appears on the TV screen.
• To exit the setup mode, press the SETUP button, or
tilt the CURSOR/ENTER button upward or
downward to select "EXIT SETUP" on the main
setup menu and press the CURSOR/ENTER
button.
Tilt the CURSOR/ENTER button upward or downward to select a setting category.
2
RC
Press the CURSOR/ENTER button to confirm your selection.
3
• On the menu screen, "
CURSOR(/ENTER) button, " ENTER " for
(CURSOR/)ENTER.
• Then the selected category or item is highlighted.
• The selected category will provide you the setting
details using the succeeding screen.
28
" stands for the