Setting The Video Setup - Sherwood V-903 Operating Instructions Manual

SETTING THE VIDEO SETUP

-- VIDEO PAGE --
TV ASPECT
SCART VIDEO
PIC MODE
MAIN PAGE
Item menu
Press the CURSOR ▲/▼ buttons to select the preferred item.
1
When selecting the TV ASPECT
• When you connect a normal TV with 4:3 aspect ratio to the unit, select either "4:3 LETTERBOX" or "4:3 PAN-SCAN" and when
you connect a wide TV with 16:9 aspect ratio, select "16:9 WIDE".
-- VIDEO PAGE --
TV ASPECT 4:3 LETTERBOX
SCART VIDEO 4:3 PAN-SCAN
PIC MODE 16:9 WIDE
When selecting the SCART VIDEO(Regional Option)
• For some countries like Europe, this DVD player incorporates the A/V SCART OUTPUT connector which can deliver either
the composite (regular) video or the S-VIDEO(Y and C) signals as well as the audio L and R signals for easy connection.
• When the SCART connections between the unit and video components are made, depending on whether you use the
composite (regular) video signal from the SCART connector or the S-VIDEO signals, you can select either the composite
(regular) video or the S-VIDEO.
Note :
• Be sure to set your TV and VCR to the corresponding one of the composite (regular) video and S-VIDEO modes to match
the SCART VIDEO setting of the DVD player.(Refer to the operating instructions of the component(s) connected.)
-- VIDEO PAGE --
TV ASPECT
SCART VIDEO
PIC MODE
• TV ASPECT : When selecting a picture size according to the aspect ratio of
• SCART VIDEO : When selecting the(composite (regular)) video signal or the
4:3 LETTERBOX
4:3 PAN-SCAN
16:9 WIDE
• PICTURE MODE : When selecting the picture mode according to the type of
Setting menu
RC
• 4:3 LETTERBOX : DVD Videos recorded with the 16:9 aspect ratio are reproduced in
• 4:3 PAN-SCAN : DVD Videos recorded with the 16:9 aspect ratio and the pan-scan
• 16:9 WIDE : DVD Videos recorded with the 16:9 screen are reproduced by filling
Note: Depending on some DVD Videos, the playback picture may not conform to the TV
aspect setting you select.
• COMPOSITE : When using the composite (regular) video signal from unit's A/V SCART
• S-VIDEO : When using the S-VIDEO signals.
COMPOSITE
S-VIDEO
your TV's screen
S-VIDEO signals to be output from the unit's A/V SCART
OUTPUT connector. (Regional Option for Eurpoe, etc. only)
content being played back.
• Then the setting menu of the selected item is displayed.
the letter box screen which has black bands on the top and bottom.
specification are reproduced in the pan-scan screen which automatically
trims the left and right of picture.
the TV screen.
OUTPUT connector.
31