Playing Tracks In Desired Order (Cd Only) - Sherwood V-903 Operating Instructions Manual

PLAYING TRACKS IN DESIRED ORDER (CD only)

• Up to 99 tracks can be programmed to be played in any desired order.
In the stop mode, press the PROGRAM MODE button.
1
RC
P .MODE
Select the desired track with pressing the NUMERIC buttons on the remote control.
2
Example) When the track 5 and 12 are programmed.
5
• For 5 :
• For 12 :
+10
Repeat the above step 2 until the desired tracks are programmed.
3
To start program playback, press the PLAY(▶) button or the ENTER button.
4
Main unit
or
Clearing the programmed tracks
[ [ To clear one by one ]
• During programming, press the CLEAR button.
RC
CLEAR
[ To clear all programmed tracks ]
• During programming or when the STOP( ) button is
pressed to stop program playback, press the PROGRAM
MODE button.
RC
P .MODE
PROGRAM 00 P-00
PROGRAM 05 P-01
2 PROGRAM 12 P-02
RC RC
ENTER
or
22
• Then the program mode is displayed on the TV screen.
• When the PROGRAM MODE button is pressed again,
the program mode is canceled.
Programmed order
Programmed track number
• Playback will start in the programmed order.
• After all programmed tracks have been played, it enters
the stop mode without clearing the programmed
tracks.(Program playback is suspended)
• Each time this button is pressed, the programmed tracks
are cleared one by one in the opposite order.
• Once program playback is performed, you cannot clear
one by one.
• Then the programmed tracks are all cleared.
• Opening the disc tray clears all programmed tracks.