Package Contents - DeWalt DWP849X Original Instructions Manual

EN GLI SH
Safety Warnings Specifi c for
Polishing Operations
a) Do not allow any loose portion of the
polishing bonnet or its attachment strings
to spin freely. Tuck away or trim any loose
attachment strings. Loose and spinning
attachment strings can entangle your fingers or
snag on the workpiece.
Additional Specifi c Safety
Instructions for Polishers
• Clean out your tool often, especially
after heavy use. Dust and grit containing
metal particles often accumulate on interior
surfaces and could create an electric shock
hazard.
• Do not operate this tool for long periods
of time. Vibration caused by the operating
action of this tool may cause permanent
injury to fingers, hands and arms. Use gloves
to provide extra cushion, take frequent rest
periods and limit daily time of use.
• Air vents often cover moving parts and
should be avoided. Loose clothes, jewellery
or long hair can be caught in moving parts.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of personal injury due to flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
– Risk of dust from hazardous substances.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
30
DATE CODE POSITION (FIG. 1)
The date code (k), which also includes the year of
manufacture, is printed into the housing.
Example:
2014 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Polisher
1 Auxiliary handle
1 Bale handle
2 Wool ingestion shields
1 180 mm hook and loop backing pad
1 180 mm hook and loop wool polishing pad
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Speed control wheel
b. Variable speed trigger switch
c. Brush inspection cap
d. Spindle lock button
e. Auxiliary handle
f. Trigger locking button
g. Bale handle
h. Spindle
i. Soft rubber gear case cover
j. Wool ingestion shield
k. Date code
INTENDED USE
Your DWP849X heavy-duty polisher has been
designed for polishing painted or unfinished metal,
fiberglass, and composite surfaces in professional
applications. Common examples of use include
but are not limited to: auto/marine/RV/motorcycle
detailing and finish correction, boat construction and
repair, and metal or concrete finishing.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.