Package Contents; Intended Use - DeWalt D26420 Original Instructions Manual

EngLIsh
d ) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional Specific Safety Rules for Sanders

WARNING: Take special care when sanding some woods
(e.g. beech, oak) and metal which may produce toxic dust.
Wear a dust mask specifically designed for protection
against toxic dust and fumes and ensure that persons
within or entering the work area are also protected.

WARNING: Use this tool in a well-ventilated area when
sanding ferrous metals. Do not operate the tool near
flammable liquids, gases or dust. Sparks or hot particles
from sanding or arcing motor brushes may ignite
combustible materials.
Sanding Paint

WARNING: Observe the applicable regulations for
sanding paint.Pay special attention to the following:
• Whenever possible, use a vacuum extractor for dust collection.
• Take special care when sanding paint which is possibly lead
based:
ʵ Do not let children or pregnant women enter the work
area.
ʵ All persons entering the work area should weara mask
specially designed for protection against lead paint dust
and fumes.
ʵ Do not eat, drink or smoke in the work area.
• Dispose of dust particles and any other removal debris safely.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
18
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot
during operation.
• Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (Fig. A)
The date code 17 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Orbital sander
1 Hook and loop sanding pad
1 Dustbag frame
1 Dustbag
3 Sheets of sanding paper
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Lock-on button
2
Speed control dial (D26420/D26422)
3
Front handle
4
Sanding sheet clamp knob
5
Sanding pad
6
Dustbag frame
7
Dustbag
8

Intended Use

Your orbital sander D26420, D26421, D26422, D26423 has been
designed for quick sanding of wood, metal and plastics in a
professional environment.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
These sanders are professional power tools.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.